MyGeotab - Battery Drain
This article explains what each type of wire means, as well as how to use it properly.
Black
- The GROUND wire; it must be connected to a known good chassis ground.
Yellow
- The ignition sense wire; it must be connected to a true ignition source (live with the key in both the ON and RUN positions, dead when the key is off). Fuse size is 1 A.
Red
- The constant power (12V or 24V) wire; it must be connected to a true battery source (live at all times). Fuse size is 5 A.
The red and yellow wires must connect to a fused source, or the user must install the fuses.
Related Articles
Geotab causing Battery Drain for the vehicle
If the vehicle is experiencing battery drain issue caused by Geotab device , check for Engine Faults . If there are any faults reported for the unit e.g multiple faults for Telematics device removed , unplugged or restarted , Please collect the ...Bewhere Beacon - Checking battery percentage of a beacon
This article explains how to check battery percentage of a beacon device. Steps 1. Login to Mygeotab > Go to bewhere dashboard 2. Now click on Beacons 3. Scroll to the right side and click on battery option 4. The ...Geotab Go6 Installation Guide
NOTE: The CAN Box Transceiver (A) needs to be installed near the G06 Unit (“H” in Diagram below). ‣ Connect the supplied Valor Wire Harness (B) to the CAN Box Transceiver (A). ‣ Connect the other end of the supplied Valor Wire Harness (B) to the ...Geotab Go6 Installation Guide
NOTE: The CAN Box Transceiver (A) needs to be installed near the G06 Unit (“H†in Diagram below). ‣ Connect the supplied Valor Wire Harness (B) to the CAN Box Transceiver (A). ‣ Connect the other end of the supplied Valor Wire Harness ...Check Battery level for Flex Tracker
Please follow the below steps to check the Battery level for a Flex Tracker. The battery level can be found under Engine & Maintenance > Engine and Device... > Measurements . Steps Login to the database Go to Engine & Maintenance Select Engine & ...