MyGeotab - Setup PTO Rule

MyGeotab - Setup PTO Rule

This article explains how to setup the PTO rule in MyGeotab.

Steps

      1. Log in to database
      2. Navigate to 'Rules & Groups' > 'Rules'


      3. Click on 'Add'


      4. Give the name to 'Rule' and navigate to 'Conditions'


      5. Select 'Add engine'


      6. Select type as 'Active Faults'
      7. Under Diagnostics type: "Power take off engaged (1 = engaged)"


      8. Click on 'Add'


      9. You have successfully added the PTO Rule

    • Related Articles

    • MyGeotab - PTO data from Engine

      Steps       1. Login to MyGeotab       2. Navigate to 'Engine & Maintenance' > 'Engine and Devices' > 'Measurements'       3. Select 'Date Period'       4. Select 'Vehicles'       5. Under Diagnostics type 'PTO' and select all the Diagnosis for PTO   ...

    • MyGeotab - Creating custom seat belt rule based on time duration

      This article explains how to create a seat belt rule based on time duration. Steps       1. Login to Mygeotab > Go to Rules & Groups        2. Then click Rules > Add Rule        3. Then Go to Conditions > Add Engine > Click Measurement and Data       ...

    • MyGeotab - How to set up Email Notifications for a rule

      This article explains how to set up email notifications for a rule. Steps       1. Select 'Rules & Groups' > 'Rules'       2. If you want a default rule, select Manage Recipients (the envelope icon)       3. If you want a custom rule, select desired ...

    • MyGeotab - Calculating engine hours for a specific date range

      This article explains how to calculate engine hours for a specific date range on MyGeotab. Steps       1. Login to Mygeotab        2. Click on 'Engine & Maintenance' > Go to 'Engine and Device'        3. Then go to 'Measurements'               4. Go ...

    • Bewhere Beacon - Creating a rule for bewhere devices

      This article explains how to create a rule for bewhere devices.  Steps     1. Login to Mygeotab > Go to Bewhere Dashboard           2. Go to Settings and select Rules             3. Select Add rule                4. Add Rule Name and Rule Type from ...